Four-Rope Panna Grab

The structure is reasonably designed with good stiffness. The ratio of grabbed material weight to grab self-weight reaches 1.5–1.92, and the fill ratio reaches 95–100%. The main bushings are made of bearing steel, and all pin shaft materials are 40Cr. The sheaves are equipped with high‑temperature resistant bearings and double‑lip rubber oil seals, providing dustproof and waterproof protection – allowing operation underwater. The cutting edge is made of wear‑resistant alloy structural steel, which is easy to weld, repair, and offers good impact resistance.

Grab

The four‑rope grab is mainly used in conjunction with overhead travelling cranes for handling various loose bulk materials, including loading, unloading, stockpiling, and feeding.

L Type Hoist Door Crane

Double Beam Semi Gantry Crane

The BMGh electric hoist type double main beam semi gantry crane mainly consists of a gantry,a crane operating mechanism,a trolley,electrical equipment,etc.The lifting mechanism is a single speed or double speed electric hoist,which is a small and medium- sized crane with rail operation.The liting capacity is generally 5-32t,the working level is A3,the working environment temperature is -20°C~+40°C,the power supply is three-phase AC,the rated frequency is 50HZ,and the rated voltage is 380V.This product has ground control and cab control.

2～16t BMH Model Electric Hoist Semi-gantry Crane

BMH Model Electrical hoist Gantry crane is used together with CD1、MD1 Model electrical hoists It is a track travelling small and medium-sized crane .Its proper lifting weight is 2 to 20 tons proper span is 5 to 30 meters .its proper working temperature is -20℃to 40℃ . The product is a general purpose use crane,ofen used in meching shop to lit goods .The product has ground controlling or remote controlling system .unload or grab materials .Using the special gear box can make the workshop widely.

MH Type 3~20t Electric Hoist Door Crane(Box type)

MH Model Electric Hoist Girder Gantry Crane is used together with CD MD Model electrichoists.It is a track traveling small and medium-sized crane.Its proper Lifting weight is 3 to 20tons.Proper span is 12 to 30 meters,its proper working temperature is-20℃ to 40℃ . This product is a regular crane widely used at open ground and warehouses to lqad,unload or grab materials.It has two controlling methods,namely ground,controlling and room controlling.

MH Type 5~20t Electric Hoist Door Crane(Trussed type)

MH Model Electric Hoist Girder Gantry Crane is used together with CD MD Model Electric hoists.It is a track travelling small and medium-sized crane.Its proper Lifting weight is 5to 20 tons.Proper span is 12 to 30 meters,its proper working temperature is -20℃ to 40℃ . This product is a regular crane widely used at open ground and warehouses to lqad,unload or grab materials.It has two controlling methods,namely ground contrlling and room controlling.

Special Gantry Crane For Road And Bridge

L Type 5~32/5t Single Main Beam Hook Door Crane

U Type 10~50/10t Double-beam Hook Door Crane

This machine is suitable for railway freight yards, ports, open-air warehouses, container transfer stations, etc. with large spans and frequent loading and unloading operations. The machine adopts a U-shaped gantry, with a large leg clearance (nearly 7m), suitable for loading and unloading large and heavy goods and containers. The machine has two types of conductive forms: sliding contact wire and cable. The sliding contact wire form is preferred, and the conductive form and position should be clearly specified when ordering.